Features
- BNC’s for 32 composite video inputs, 8 video outputs
- 32 electromechanical relay outputs with NC, NO selection
- 32 optically isolated digital inputs
- Compatible to model 609, 615 and 617
- Power supply for video cameras
Description
This accessory box allows connecting cameras, video monitors and digital I/O signals to models 609, 615 and 617 frame grabbers. It also supplies 12 VDC power for up to 32 cameras. Signal connections between the frame grabber boards and the box are via flat cables.
Video inputs
Thirty-two BNC’s connect composite video to the frame grabbers. Transorb diodes protect each input from power surges.
Video outputs
Eight real-time video outputs are available for display on video monitors. If two 609 frame grabber boards are used then any of the thirty-two video inputs may be connected to any eight of the video outputs.
Camera power
The 609TB can supply 12 VDC, 200 mA to as many as 32 cameras. Spring-loaded wire terminals allow connecting camera power wires without the need for wire terminal lugs. Adjacent to each set of supply terminals is a power indicator lamp.
If two 617 frame grabber boards are used, then any of the thirty-two inputs may be connected to any of the first four video outputs. Transorb protection diodes on the 609TB help protect the frame grabber.
Each camera circuit has a resetable fuse to isolate the other cameras from short circuits. A short circuit will turn off the indicator lamp.
Relay outputs
Sixteen electromechanical relays are available for switching bipolar circuits of up to two amps. Circuits on each 609 or 617 frame grabber activate sixteen relays. A slide switch above each set of relay terminals allows selecting normally open or normally closed operation.
Digital inputs
Sixteen digital inputs are available for sensing external events. Each input is optically isolated from the 609 or 617 frame grabber board.
Enclosure mounting
Two removable mounting brackets may be attached to the box in three different positions to allow mounting in a standard 19” enclosure or attachment to a vertical or horizontal surface.
Mechanical Drawings and Diagrams
Model 609TB Digital I/O
Video out to 609 board
Video inputs to 609 and 615 boards
Model 609TB Installation
609 Series Accessories
| | Specifications | | Number of camera power circuits | 32 | | Power available per camera | 12 VDC, 200 mA per camera | | Resetable fuse rating | 750 mA | | Number of form-C relays | 32 | | Number of 609’s or 617’s required for 32 relays | 2 | | Relay contact rating | 2A 30 VDC | | Number of video inputs | 32 | | Number of 609’s, 615’s or 617’s required for 32 inputs | 2 | | Maximum input voltage protection | 6 V | | Number of real-time video outputs | 8 with 609 frame grabber, 4 with 617 frame grabber | | Number of optically isolated inputs | 32 | | Digital input amplitude | 5 V 48 V | | Compatible frame grabbers | 609, 615, 617 | | Input power | 1 A at 120 VAC, 0.5 A at 330 VAC | | Weight | 8 lb. (3.6 kg) | | Dimensions: Length, Height, Depth | 19” x 3.95” x 7.0”
482.6 mm x 176.5 mm x 180.8 mm | | |
