Enciris Technologies - Sensoray Products Division :: Analog I/O boards

ENCIRIS TECHNOLOGIES - SENSORAY PRODUCTS DIVISION

Sensoray Products

Help

Model 2518DIN| Ethernet A/D Interface

Features

8 or 16 differential thermocouples, RTD’s, strain gauges, thermistors, resistance, 4-20 ma, or voltage inputs
Includes screw terminals for field wiring
10-Base-T Ethernet server with embedded TCP/IP stack
Includes interface DLL
Single supply operation
Each channel is software programmable for sensor type, gain, low-pass filtering, scan rate
Optional NEMA Enclosure

Description

Sensoray’s Models 2518DIN and 2519DIN are the lowest cost-per-channel interfaces for strain gauges, temperature sensors, voltage or 4-20 mA to any computer with an Ethernet port. They feature 16-bit resolution from either eight or sixteen differential input channels, each individually programmable for a different sensor type. Analog-to-digital conversion is performed in under 22 milliseconds per channel for each block of eight channels. Model 2519DIN has two A/D converters.

Linearization, gain, and sensor type are software programmable, eliminating trim potentiometers and the need for board access. Sensor field wires may be connected directly to screw terminals on the Ethernet base board. Two temperature sensors automatically compensate thermocouples.

Calibration
Models 2518/19DIN automatically self calibrate by measuring internal references. Reference data is stored in EEPROM’s so the boards may be easily interchanged.

Communication
The 10 Base-T network interface implements the physical Ethernet layer, the data link, network and application layers. It supports ARP, IP, ICMP and UDP. No communication software need be downloaded. The Ethernet board can process over 1500 messages per second.

The IP address is set by programmable shunts. The high-order 3 bytes must be specified upon ordering from Sensoray. For example, if the unit is to operate at 192.168.2.x, specify “192.168.2” when ordering. The “x” is field-programmable via shunts.

Mechanical
The 2518/19DIN comes with DIN rail hardware. An optional NEMA-4 enclosure, 2509E, and line operated power supply, 201, are also available.

Field Wiring
Sensor wires connect to removable terminal blocks that are supplied with the 2518/19DIN. Each sensor channel has five conductors: two for sensor power, two for voltage measurement and one for a shield. No additional cables or breakout boards are required.

Optional NEMA Enclosure is available. Please refer to price table below.

Application Notes
Thermocouples >> Lead loss errors >> Typical sensor connections

Software & Manuals
It is not necessary to write or download programs. The 2518DIN are supplied with the necessary Ethernet software. An optional data logging program, QuickSense, allows easy channel definition and data readback. The 2518DIN is supplied with SDK18 software that has a DLL.
2518/2519DIN Instruction Manual >> Released 7/28/03
SDK18 (32-bit DLL) >> Released 5/1/03
Quicksense Software >> Released 12/15/99

General Specifications
Input resistance	1000 M ohm
Max input voltage	63 VAC rms
CMMR	95 dB min
Max common mode	+/-5 volts
A/D converter	16-bit integrating
Conversion time	22 mS per channel
A/D scan rate	45 samples/sec
Operating temperature	-25C to 85C
PC/104 interface	8-bit data, 16-bit address
Input power	12 to 30 V AC/ DC
Output voltages	5V, 1A \| +/- 12V, 100 mA
Number of channels	8 channels
Ethernet Specification
Type	10 base T
Transactions/second	1600
Protocols	ARP, IP, ICMP, UDP
Connector type	RJ-45
Mechanical Specifications
L x W x H	9.42” x 3.8” x 1.87”
For Sensor Types, Resolution, Range and Codes click here

Mechanical Drawings and Images

Typical Application

Mechanical Drawings and Images

2418 drawing

Typical Application

Details

SKU	SKU16138
Weight	300.00 g
Single item price(ex. VAT):	€365.00

	Contact us for availability

Send to colleague

Accessories

	Model 2509 \| NEMA-4 Enclosure
	Model 204 \| 24 V 120 Watt Power Supply