Ordering information for LT-101-USB real-time low latency HDTV and SDTV multimedia acquisition and compression modules for USB

Media Acquisition and Compression Module
Order Code: LT-101-USB-VC1

The LT-101-USB-VC1 is a USB HD video capture module that VC-1/SMPTE-421/WMV-HD compresses HDTV video in real-time. This module is connected to a host computer via USB. An external power supply as well as a USB cable are included.

Media Acquisition and Compression Module with an SDI Input
Order Code: LT-101-USB-VC1-SDI

The LT-101-USB-VC1-SDI is a USB HD video capture module that VC-1/SMPTE-421/WMV-HD compresses HDTV video in real-time. This version includes an HD-SDI/SD-SDI input. This module is connected to a host computer via USB. An external power supply as well as a USB cable are included.

BNC to VGA cable
Order Code: CAB-BNC5-VGA

This cable is used to connect analog RGB or YUV sources to the LT-101. With the 5 BNCs a variety of sync combinations can be used including separate H and V syncs as well as sync on green (SOG) Use this cable with our VGA to DVI adapter.

YUV/YCrCb/Component/RGB RCA to DVI Adapter
Order Code: ADP-YUV-RCA3-DVI

This cable adaptoer is used to connect YUV/YCbCr/component or RGB (sync on green) sources to the the LT-101.

1.8m/6ft DVI-I cable
Order Code: CAB-DVI-I6

A DVI cable to connect DVI sources to the LT-101.

1.8m/6ft HDMI cable
Order Code: CAB-HDMI6

Use this cable and our HDMO to DVI adapter to connect HDMI sources to the LT-101.

HDMI to DVI adapter
Order Code: ADP-HDMI-DVI

This HDMI to DVI adapter allows the connection of HDMI sources to the LT-101. Note: Many HDMI sources are HDCP (copy protection) coded and this adapter does not remove HDCP.

1m/3ft VGA Cable
Order Code: CAB-VGA3

A VGA cable for use with our VGA to DVA adapter.

VGA to DVI Adapter
Order Code: ADP-VGA-DVI

This adapter is used to connect analog VGA sources to the LT-101.

2m/6ft Composite Video BNC Cable
Order Code: CAB-BNC6

Composite video BNC cable for LT-101.

3.5m/12ft S-Video cable
Order Code: CAB-SVIDEO12

S-video cable for the LT-101.

RCA Female to BNC Adapter
Order Code: ADP-RCA-BNC

Allows the user to connect RCA composite NTSC/PAL directly to the LT-101 with this adapter.

0.2m/9in Dual RCA Female to Stereo Jack Cable/Adapter
Order Code: CAB-RCAM-STEREO

Used to connect stereo audio sources to the LT-101.

1.8m/6ft RCA Male to Stereo Jack Cable
Order Code: CAB-RCAF-STEREO6

Used to connect RCA plug equipped audio sources to the LT-101 with this cable.