Media Acquisition and Compression Board
Order Code: LT-101-PCI-VC1
The LT-101-PCI-VC1 is an HD video capture board that
VC-1/SMPTE-421/WMV-HD compresses HDTV video in real-time.
This board installs in a free PCI slot. Alternatively
it can be connected via USB (external power supply
and a USB cable required but not included for USB operation).
Options
SDI Daugther board for LT-101-PCI
Order Code: LT-101-SDI
This option adds an HD/SD-SDI input to the LT-101-PCI-VC1
Accessories
External power supply for LT-101-PCI products
Order Code: LT-101-PS
This power supply is veeded when using
LT-101-PCI-VC1 as a USB device.
Cables and Adapters
1.8m/6ft USB cable
Order Code: CAB-USB-AB6
This cable is needed when using LT-101-PCI-VC1
as a USB device.
BNC to VGA cable
Order Code: CAB-BNC5-VGA
This cable is used to connect analog RGB or YUV sources to the LT-101.
With the 5 BNCs a variety of sync combinations can be used
including separate H and V syncs as well as sync on
green (SOG) Use this cable with our VGA to DVI adapter.
YUV/YCrCb/Component/RGB RCA to DVI Adapter
Order Code: ADP-YUV-RCA3-DVI
This cable adaptoer is used to connect YUV/YCbCr/component or RGB (sync on green) sources to the the LT-101.
1.8m/6ft DVI-I cable
Order Code: CAB-DVI-I6
A DVI cable to connect DVI sources to the LT-101.
1.8m/6ft HDMI cable
Order Code: CAB-HDMI6
Use this cable and our HDMO to DVI adapter to connect HDMI sources to the LT-101.
HDMI to DVI adapter
Order Code: ADP-HDMI-DVI
This HDMI to DVI adapter allows the connection of HDMI sources to the LT-101.
Note: Many HDMI sources are HDCP (copy protection) coded and this adapter does
not remove HDCP.
1m/3ft VGA Cable
Order Code: CAB-VGA3
A VGA cable for use with our VGA to DVA adapter.
VGA to DVI Adapter
Order Code: ADP-VGA-DVI
This adapter is used to connect analog VGA sources to the LT-101.
2m/6ft Composite Video BNC Cable
Order Code: CAB-BNC6
Composite video BNC cable for LT-101.
3.5m/12ft S-Video cable
Order Code: CAB-SVIDEO12
S-video cable for the LT-101.
RCA Female to BNC Adapter
Order Code: ADP-RCA-BNC
Allows the user to connect RCA composite NTSC/PAL directly to the LT-101 with this adapter.
0.2m/9in Dual RCA Female to Stereo Jack Cable/Adapter
Order Code: CAB-RCAM-STEREO
Used to connect stereo audio sources to the LT-101.
1.8m/6ft RCA Male to Stereo Jack Cable
Order Code: CAB-RCAF-STEREO6
Used to connect RCA plug equipped audio sources to the LT-101 with this cable.