Enciris Technologies - Sensoray Products Division :: Video capture :: Model 614

ENCIRIS TECHNOLOGIES - SENSORAY PRODUCTS DIVISION

Sensoray Products

Help

Model 614 | MPEG Video Capture and Overlay

Video Overlay
Captured compressed video can be imposed with up to eight windows of caption or annotation overlay. Text and image overlay are supported. Up to 64 characters or bitmap blocks can be inserted into each of the eight windows. See an example overlay frame here.

Uncompressed capture
The 614 can function as a conventional frame grabber by supplying uncompressed video with low latency and snapshots of single frames.

Motion detection
The 614 performs motion detection in three user programmable regions of interest. For each separate region of interest, the user can set up different motion detection sensitivity. Within the regions of interest motion can be further localized to a 16x16 pixel block. The following links show examples of the motion detection setup menu for Windows and the regions of interest. The motion map shows where the motion was detected. (Please see image under the tab: Images and Mechanical Drawings).

Audio multiplexing
Digitized audio from the 614 is multiplexed into MPEG streams by a Sensoray-supplied software in the SDK. Hence, the 614 does perform A/V multiplexing as do the models 314 and 616. The audio signal can be connected to the 614 via a stereo audio jack or through the 24pin header.

Advantages of compression
MPEG and MJPEG data reduces the amount of memory required to store full motion video. The compressed data requires a smaller transmission bandwidth. MJPEG data is typically compressed by a factor 20 while MPEG-2 and -4 by a factor of 100. Image compression makes it possible to transmit 30 frames/sec of MPEG video over the PCI bus. The hardware compression circuit uses a motion estimation algorithm to produce smooth images from interlaced cameras.

Details

SKU	SKU16328
Weight	300.00 g
Single item price(ex. VAT):	€365.00

	Contact us for availability

Send to colleague